6000A 16V IGBT Rectifier by 3 Modules in parallel, easy maintenance and power expanding.
Touch panel for easy setting, historical data saving, problem display and maintenance, and even special curve and process setting.
1. Rectifier Basic function:
Constant current, constant voltage setting
Local, remote control setting
Output current or voltage setting
DC output voltage, current, power display
Rectifier running status display
Alarm indication and sound
Communication status indication
Running time display
Protection cause automatic display
Rectifier stop delay time setting
Protection shield function
History date record function
History protection record function
Communication address setting
Amperehour control for dosing system
2. Basic parameter:
Rectifier type: IGBT high frequency rectifier, modular structure, easy for maintenance
DC Output : DC 0-16V 0-6000A
Output rated power: 96kW
Input voltage: 415V/380V/220V AC +-10% 3 phase 4line, 50/60Hz
Output regulation range: 0-100%
Control mode: constant current/constant voltage selectable
Working mode: 100% 24 hours continuous running
Alarm type: Audible and visual alarm
Enclosure and main circuit board components are anti corrosion coating.
During power failure, after power on again to the rectifier, rectifier could switch on immediately and start rising up to set current.
Ripple ripple: ≤5%(enough for electroplating)
IP degree: IP54
Insulation grade: B(temperature classification of insulating materials, B means allowed temperature rise than ambient temperature is 130℃)
3. Ripple affect comparison with SCR rectifier:
Ø For SCR rectifier, If current is only 20% of rated value, voltage is almost full load, the plating quality will not be affected; if output voltage is only 20%, there is effect to plating quality, normally 5% ripple requirement is for current ripple.
e.g. If ou have 10000 amp SCR rectifier 12 volt, you plate at 6000 amp 12 volt, the quality will not be affected; if you plate at 6000 amps and 6 volt, then quality will be affected.
Ø In the IGBT rectifier, because it is high frequency output, plating quality is not affected even working at half voltage, such as 6 volt, and we also add filter to reduce ripple as low as possible, not affect plating quality.
4. Solution to corrosive factory
Isolated control box
Control board paint protected
All screws are stainless steel material
5. Strong polywood case, with foam, plastic film inside to protect inner rectifier.
In technical design, we also consider dimension for shipping.
6. Our service:
To work better for customers:
1).We supply onsite training and service abroad.
2).Customers to our factory for training.
3).Online technical support.
4).Due to DSP control, program can be updated easily by customer.
5).Spare parts avaialble.
6).After-sale service within 24h.
7. In last years, we've been to over 20 countries for onsite support and exhibition, all our efforts just for reliability for you.
Bosnia and Herzegovina,
Your Concern, Our Concern!
Looking for to europe 6000a 16v air cooling rectifier modular design? Green Power Technology is one of the professional manufacturers and suppliers. We have been dedicated to this field for over 20 years and already exported products to India, USA, Germany, etc. Equipped with a productive factory, we warmly welcome you to buy our high quality products made in China at competitive price or try our customized service.