1000A12V IGBT Electroplating Rectifier

IGBT based DC rectifier for electroplating 1000A 12V air cooling, Modular design Upgradable output current Power saving(high efficiency≥90%) Much less process time needed Low ripple at all output current Space-saving Easy...

Product Details

electroplating line

IGBT based DC rectifier for electroplating 1000A 12V air cooling

Rectifier video on Youtube:

       

rectifier inside pictures 2.jpg

Rectifier User Benefits

  • Modular design

  • Upgradable output current

  • Power saving(high efficiency≥90%)

  • Much less process time needed

  • Low ripple at all output current

  • Space-saving

  • Easy service

  • Reliable quality

  • Special treatment in corrosive factory

  • Digital control, software programming

  • High stability to load variation

  • Long time high control accuacy(≤0.5%)

  • RS485 communication included

  • Amperehour for dosing system control

  • Timer function for automatic running

  • Resolution 1A and 0.1A

  • Accurate output value setting

  • Process program available

  • Rectifier protection stop delay time setting available

  • Multiple remote control communication optional: Profibus, Profinet, analog signal 4-20mA,0-10V

  • Touch panel or digital meter, buttons control optional

  • Touch panel operation password protection available

  • Technical support and service

  • Spare parts available

  • Software upgrading



Rectifier Technical Data

Rectifier type:             IGBT high frequency rectifier, modular structure

Working duty:            100% 24 hours continuous running 

Supply voltage:          415V/380V/220V AC ±10% 3 phase 4 line, 50-60Hz

Rated output voltage: DC 12V

Rated output current: DC 1000A

Output range:             0-100%

Control Accuracy:       ≤±0.5%

Power factor:              ≥0.94

Efficiency:                   typical 90% at rated output

Current ripple:             ≤2% of rated output current at constant current mode, low ripple in whole range, provide

                                   good plating  quality.

Control mode:             constant current/constant voltage 

Cooling:                      Forced air cooling, Water cooling.

Protection class:         IP32 for air cooling, IP54 for water cooling

Insulation grade:         B

Protections:                Output overcurrent protection

                                   Short circuit protection

                                   Over heat protection

                                   Input over/under voltage protection

                                   IGBT Driving protection

                                   Water pressure protection

Ambient temp.:            Max. 40℃, derated operation up to 50℃

Altitude:                       ≤2000m altitude. De-rated operation if higher.

Humidity:                     Max. 90% RH, non-condensing



Rectifier Functions


  • Constant current, constant voltage setting

  • Local, remote control setting

  • Output current or voltage setting

  • Time setting

  • Amperehour control for dosing system

  • Manual/auto mode

  • Timer reset

  • Amperehour reset

  • START/STOP

  • Rectifier stop delay time setting

  • Protection shield function

  • DC output voltage, current, power display

  • Rectifier running status display

  • Alarm indication and sound

  • Communication status indication

  • Running time display

  • Amperehour display

  • Protection cause automatic display

  • Circuit board are anti corrosion treated, screws are stainless steel material.

  • Keep last time setting mode and output value when power-on again

  • In case of power failure, after power resuming, the rectifier could switch on automatically and start rising up to set current.

  • Alarm type: Audible and visual alarm

  • History date record function

  • Waveform function

  • History protection record function

  • Waveform function

  • History protection record function


Rectifier Remote PLC Control

RS485, Profibus DP, Profinet,0-10V, 4-20mA

  • DC output current signal

  • DC output voltage signal

  • Amperehour value signal

  • Protection alarm signal

  • Start/Stop operation

  • DC output value setting

  • Constant current, constant voltage selection


PLC control of rectifier.png


Rectifier Options

Rectifier optional functions.png


Main Parts Brand

parts supplier.png

Contact us: 

Email: amy@bjgreenpower.com

Tel: 00447520631108, 00861056250889

Mobile/whatsapp/wechat: 008618500983665

Skype: beijinggreenpower.amy







Looking for 1000A12V IGBT Electroplating Rectifier? Green Power Technology is one of the professional manufacturers and suppliers. We have been dedicated to this field for over 20 years and already exported products to India, USA, Germany, etc. Equipped with a productive factory, we warmly welcome you to buy our high quality products made in China at competitive price or try our customized service.

Send Inquiry