IGBT based Battery charger 200A 48V air cooling 415V input
1. AC Input
Input AC phase
Three-Phase, 5 Wire AC system (3Ph.+N+PE)
Input line voltage(V)
415V (+6% and -10%) as per IS 12360
2. DC Output
Output mode and range
Constant Current, 0-100% of rated value
Constant Voltage, 0-100% of rated value
100% full load
3. Electrical Features
Power Factor(Full load)
Air cooled or Forced air cooling
Communication with PLC
IP30, please specify if you require higher
B, please specify if you require higher
Audible and visual alarm
Three phase AC input is converted to DC through rectification and filter, then DC voltage is transformed to DC output through phase shift full bridge PWM DC/DC converter.
l Power requirement: AC 480V+/-10%, 3 phase 3 line+Grounding wire, 3 phase imbalance less than 5％, and meet national electricity quality standard.
l Used indoors, ambient temperature: 0℃～+40℃.
l Relative humidity: ≤90% (relative to 20±50℃).
l Elevation: less than 2,000 meters.
l There shouldn’t be excessive amount of dust, explosive and corrosive gas in the air.
l The installation place should be without severe vibration, the vertical gradient shouldn’t exceed 5%.
l The seismic intensity of the installation site is less than 7 on the Richter scale.
l Saturated vapor pressure: daily average value is less than 2.2×10-3M pa, monthly average value is less than 1.8×10-3Mpa.
As R&D leader, complete solution provider of industrial power supplies, power quality products, railway electric equipments, the products and service are wided applied for New Material, New Energy, Aerospace, Environment Protection, Railway, Oil exploration, Military, Metallurgy, Nuclear etc. fields, used for Mono silicon, Poly silicon, Sapphire, Gallium Arsenide(GaAs), Plasma, Caustic Soda, Non-ferrous Metal Electrolysis, Charging and Energy Storage， Surface Treatment, Arc furnace etc. industries.