DC power supply power 6000A15V for anodizing aluminium
Anodizing is a process for producing decorative and protective films on articles made from alumnium and its alloys. It is essentially a process where a thick film of aluminium oxide is built up on the surface of the aluminium through the use of a direct current electrical supply. In the majority of anodising plants in New Zealand it is carried out in an electrolyte bath containing sulphuric acid with aluminium sheet cathodes and the work to be anodised attached to the anode.
Our DC power supply power is for low voltage high current plating/anodizing applications, the control options include current control, voltage control and adjustable ramping to gradually ramp up as the oxide film thickness builds. Generally, DC power supplies are used and will maintain 5 percent or less ripple at full-rated output. Options are available for air- or water-cooled models.
2. Working principle
4. Mechanical configuration
The size can be customized according to customer requirements.
5. HMI functions
We always follow ISO9001 quality management system to do the quality control, and provide qualified Power Supplies and Power Quality products to worldwide customers. Each rectifier has a quality control process.
(1) PCB board reliability testing
(2) Full load testing
Stong technology ability , we have More than 20 years power electronics R&D and engineering experiencecs, high-tech company, with patents, software copyrights.
8. Overseas agent