3500A 15V Water Cooling IGBT Rectifier For Electroplating

1.Technical data 2.Mechanical configuration 3.AC power supply connection The rectifier should be connected to a 3-phas e 5 line AC power supply with voltage according to rating plate on the rectifier. Input Cable size: 3500A 15V: above 35mm 2 cables for AC power supply connection. 5mm 2 above...

Product Details

1.Technical data

1. AC Input

1.1

Input AC phase

3 phase(A,B,C,N,G)

1.2

Input line voltage(V)

AC 360-440V

1.3

Input Frequency(Hz)

50Hz

2. DC Output

2.1

Rated Output

3500A/15V

2.2

Output mode and range

Constant Current, 0-100% of rated value



Constant Voltage, 0-100% of rated value

2.3

Duty

100% full load

2.4

Accuracy

<1%

3. Electrical Features

3.1

Application

Plating

3.2

Regulation mode

IGBT PWM

3.3

Remote control

RS485

3.4

Power Efficiency(Full Load)

90%

3.5

Power Factor(Full load)

≥0.93

3.6

Cooling Method

Water cooling

3.7

IP degree

IP54

3.8

Insulation Grade

B

3.9

Working Mode

Continuous

3.10

Alarm type

Audible and visual alarm(on rectifier front panel and touch panel)

2.Mechanical configuration

2

3.AC power supply connection

The rectifier should be connected to a 3-phase 5 line AC power supply with voltage according to rating plate on the rectifier.

Input Cable size:

3500A 15V: above 35mm2 cables for AC power supply connection.

5mm2 above ground wire is required for grounding. 

3

4.Working Condition

Power requirement: AC 360-440V, 3500A 15V, 3 phase imbalance less than 5%, and meet national electricity quality standard.

Used indoors, ambient temperature: 0℃+40℃.

Relative humidity: ≤90% (relative to 20±50℃).

Elevation: less than 2,000 meters.

There shouldn’t be excessive amount of dust, explosive and corrosive gas in the air.

The installation place should be without severe vibration, the vertical gradient shouldn’t exceed 5%.

The seismic intensity of the installation site is less than 7 on the Richter scale.

Saturated vapor pressure: daily average value is less than 2.2×10-3M pa, monthly average value is less than 1.8×10-3Mpa.

5.Electroplating Case

4



Looking for 3500a 15v water cooling igbt rectifier for electroplating? Green Power Technology is one of the professional manufacturers and suppliers. We have been dedicated to this field for over 20 years and already exported products to India, USA, Germany, etc. Equipped with a productive factory, we warmly welcome you to buy our high quality products made in China at competitive price or try our customized service.
Hot Tags: 3500a 15v water cooling igbt rectifier for electroplating China, India, manufacturers, factory, customized, high quality, price,

Send Inquiry

You Might Also Like