1500A24V AC and DC rectifiers for anodizing and hard anodizing. IGBT technology, Modular design, High efficiency. Power saving.
n Rectifier type: IGBT high frequency rectifier, easy for maintenance
n Rated Output: 1500A 24V
n Input voltage: 380V（three-phase）AC 50HZ
n Output regulation range: 0-100%
n Control mode: constant current/constant voltage selectable
n Air cooling
n Power factor:>0.94
n IP degree: IP30
n Insulation grade: B
n Working mode: 100% 24 hours continuous running
n Alarm type: Audible and visual alarm
n Enclosure and main circuit board components are anti corrosion coating.
n Rectifier has ON&OFF MCB.
n During power failure, after power resuming the power supply to the rectifier, rectifier could switch on immediately and start rising up to set current.
n For safety, provide below protections:
n Control board: use digital control board
n Cabinet: use 2mm thick cold-rolled steel plate or aluminum coated zinc plate. The cabinet is anti-corrosion treated.
n High frequency transformer: use Nanocrystalline material as core, it is high efficiency, long time reliable running.
n Bus bar: use red copper bus bar, the purity of copper is 99.9%.
n Cooling fan: use Taiwan or Japan brand high quality fan, with lifespan 100000 hours.
n Touch panel: easy for troubleshooting, while there is protection, it will show protection type automatically.
n Capacitor: Taiwan brand reliable capacitors.
n IGBT: Germany or Japan brand.
n SMPS: use Taiwan brand MEANWELL.
n Rectifier diode module: China best quality brand, some other supplier use other lower quality brand.
n Current sensor: China best quality brand.
n Cables, wires, screws: use best quality.
n Main component brand:
Fuji(Japan) or Infineon(Germany)
MACMIC or Sanrex
MACMIC or IXYS(Germany), DACO(Taiwan)
Beijing Sensor Electronics
MCGS(OEM manufacturer of Siemens)
STA rectifier Video: https://youtu.be/3ibXXSNAa1w，
Plating Application Videos: https://youtu.be/JXmMKfApHLU