10000A24V Aluminum Anodizing Rectifier

10000A24V Aluminum Anodizing Rectifier

Application This is application of 10000A24V aluminum anodizing rectifier . Water cooling. Main circuit Diagram 6 modules parallel connection. Technical data Customer Benefits of IGBT rectifier Power saving Through IGBT PWM technology, rectifier conversion efficiency is much higher than...

Product Details

Application

This is application of 10000A24V aluminum anodizing rectifier. Water cooling.

25000A12V.jpg


Main circuit Diagram

6 modules parallel connection.

image


Technical data

Items

Specifications

Rectifier type

IGBT High Frequency Rectifier, Modular Structure, Easy for Maintenance

Working duty

100% 24 hours continuous running

AC Input

380V+-10%, 3 phase 5 line(A,B,C,N,G), 50Hz

DC Output

10000A24V

Mechanical Type

Modular Design

Output Regulation Range

0 ~ 100 %

Control Mode

Constant current/constant voltage selectable

Operation mode

Auto(control by PLC through MODBUS RS485 Interface) & Manual(control by control box touch panel)

Remote control interface

RS485.

HMI

Touch Panel

Cooling

Water Cooling

Accuracy

≤1 %

Output Ripple(peak-peak)

10%(if there is no special requirement), actual current ripple is lower because of cables and anodizing tank filtering function

Corrosion Coating

For Enclosure and main circuit board components

Protections

over heat, over current, voltage limit, short circuit, input over/under voltage protection, IGBT driving protections

Alarm type

Audible and visual alarm

Power recovery

After power resuming the power supply to the rectifier, rectifier switch on immediately and start rising up to set current

IP degree

IP42

Power Factor

0.94

Efficiency

typical 90% at rated output(power saving than thyristor rectifier)

THDi

Approximately 25% (depends on the system impedance)

If need lower THDi, please tell us to provide optimized solution

High frequency transformer

B

 Customer Benefits of IGBT rectifier

  • Power saving

Through IGBT PWM technology, rectifier conversion efficiency is much higher than conventional SCR rectifier, thus saving power of user dramatically.

  • Same quality

The quality is same level by using IGBT rectifier than conventional SCR rectifier, this is proved by several on-site actual testing.

  • Higher power factor, Low pollution to grid

  • Modular structure

  • Not affected by power fluctuation, 100% output, don't need extra capacity

  • Same high reliability as SCR rectifier, long time 7 days 24 hours continuous running

  • Lower cost for the same specification

Looking for 10000a24v aluminum anodizing rectifier? Green Power Technology is one of the professional manufacturers and suppliers. We have been dedicated to this field for over 20 years and already exported products to India, USA, Germany, etc. Equipped with a productive factory, we warmly welcome you to buy our high quality products made in China at competitive price or try our customized service.

Send Inquiry