Application:
This is 1000A12V plating rectifier with 0-10V remote control, Analog control.
Europe quality, low cost, power saving.100% 24 hours continuous running
Technical parameters:
1. AC Input | ||
1.1 | Input AC phase | Three phase 5 line(A,B,C,N,G) |
1.2 | Input line voltage(V) | 400V+-10% |
1.3 | Input Frequency(Hz) | 50Hz |
2. DC Output | ||
2.1 | Rated Output | 1000A/12V |
2.2 | Output mode and range | Constant Current, 0-100% of rated value |
Constant Voltage, 0-100% of rated value | ||
2.3 | Duty | 100% full load |
2.4 | Accuracy | <1% |
3. Electrical Features | ||
3.1 | Application | Electroplating |
3.2 | Regulation mode | IGBT PWM |
3.3 | Power Factor(Full load) | ≥0.93 |
3.4 | Cooling Method | Forced air cooling |
3.5 | IP degree | IP30, please specify if you require higher |
3.6 | Insulation Grade | B, please specify if you require higher |
3.7 | Working Mode | Continuous |
3.8 | Alarm type | Audible and visual alarm |
3.9 | Ripple | ≤10% |
3.10 | Timer function | Yes |
3.11 | Ampere hour function | Yes |
3.12 | PLC control interface and protocol | 0-10V |
3.13 | Control panel | On control box, through cable 3 meters long |
Rectifier 3D Pictures:
1 | Control Box |
2 | RS485 interface |
3 | 0-10V interface |
4 | Control boxinterface |
5 | Indication lights on rectifier(Power, Run, Alarm) |
6 | Output DC terminal - |
7 | Output DC terminal + |
8 | AC three phase input |
9 | Grounding bolt |
10 | Breaker on rectifier |
11 | Current Display on control box |
12 | Voltage display on control box |
13 | Timer |
14 | Output Setting |
15 | CC/CV switch |
16 | Start/Stop switch |
17 | Remote/Local switch |
Green Power rectifier running on site: