Introduction of Anodizing
Anodizing including Aluminum anodizing and hard anodizing 2 kinds of. Anodizing is an electrochemical process that converts the metal surface into a decorative, durable, corrosion-resistant, anodic oxide finish. Aluminum is ideally suited to anodizing, although other nonferrous metals, such as magnesium and titanium, also can be anodized.
The anodic oxide structure originates from the aluminum substrate and is composed entirely of aluminum oxide. This aluminum oxide is not applied to the surface like paint or plating, but is fully integrated with the underlying aluminum substrate, so it can't chip or peel. It has a highly ordered, porous structure that allows for secondary processes such as coloring and sealing.
Green Power Provides the DC Power Supply for Anodizing
2000A24V power supply from Green Power
IGBT Rectifier Technical Data
Type | IGBT High Frequency Switch Mode Rectifier |
Structure | IGBT high frequency rectifier, Modular structure |
Working duty | 100% 24 hours continuous running |
Input voltage | 380/415V/480V AC ±10% 3 phase 4 line, 50-60Hz |
Rated output voltage | DC 20V, 24V, 40V, higher voltage for hard anodizing 70V, 120V |
Rated output current | DC 500A-20000A |
Output range | 0-100% |
Control Accuracy | ≤±0.5% |
Power factor | ≥0.94 |
Efficiency | typical 90% at rated output |
Current ripple | ≤10% to ≤1% of rated output current at constant current mode, low ripple in whole range, |
Control mode | constant current/constant voltage |
Cooling | Air cooling or water cooling |
Protection class | IP32 for Air cooling，IP44 for Water cooling |
Insulation grade | B |
HMI | Touch Panel on control box |
Remote control interface | Standard RS485, Profibus, Profinet, 0-10V/4-20mA available |
Alarm type | Audible and visual alarm |
Protections | Output overcurrent protection |
Over heat protection | |
IGBT Driving protection | |
Features | Digital DSP control(USA TI DSP Chip) |
History date record function | |
Waveform function | |
History protection record function | |
Timer | |
Anticorrosion treatment | |
Ambient temp | Max. 40℃, derated operation up to 50℃ |
Altitude | ≤2000m altitude. De-rated operation if higher |
Company Introduction
High-tech enterprises, more than 20 years of experience in R&D and engineering of power electronics products
Strong technical strength, 6 doctors, 20 masters
More than 30 patents and software copyrights
Exported to more than 40 countries and regions such as the United States and Canada, and established agencies in more than 10 countries
Products through the United States UL, Canada CSA, European CE certification
Passed ISO9001:2015 Quality Management System Certification
16,000 square meters clean workshop
Certification
Contact us
Email: alice@bjgreenpower.com
Mobile: +86 13810151476
Linkedin: https://www.linkedin.com/in/alice-lee-20b63515b/
Company video: https://youtu.be/VMMHVM-iDn0
60V Power Supplies For Silicon Ingot Crystal Growing...
Thyristor DC Rectifier For Non-ferrous Metals Electr...
Trolley Rectifier For Copper Electrowinning & Electr...
Super High Power EV Electric Vehicle Charger CE UL
UL, CSA, CE Water Cooling Data Center Power Supply F...
3000A24V Dc Metal Plating Rectifier