2000A15V Anodising Power Supply

2000A15V Anodising Power Supply

This is rectifier suitable for 2000A15V, 3000A15V anodising power supply, hard andising power supply, chromic anodising rectifier, electroplating rectifier etc.

Product Details


This is rectifier suitable for 2000A15V, 3000A15V anodising power supply, hard andising power supply, chromic anodising rectifier, electroplating rectifier etc.


Anodising power supply technical data:



Rectifier type

IGBT High Frequency Rectifier, Modular Structure, Easy for Maintenance

Working duty

100% 24 hours continuous running


340V-440V, 3 phase 5 line(A,B,C,N,G), 50Hz



Mechanical Type

Modular Design

Output Regulation Range

0 ~ 100 %

Control Mode

Constant current/constant voltage selectable

Operation mode

Auto(control by PLC through MODBUS RS485 Interface) & Manual(control by control box touch panel)

Remote control interface



Touch Panel


air Cooling


≤1 %

Output Ripple(peak-peak)

10%(if there is no special requirement), actual current ripple is lower because of cables and anodizing tank filtering function

Corrosion Coating

For Enclosure and main circuit board components


over heat, over current, voltage limit, short circuit, input over/under voltage protection, IGBT driving protections

Alarm type

Audible and visual alarm

Power recovery

After power resuming the power supply to the rectifier, rectifier switch on immediately and start rising up to set current

IP degree


Power Factor



typical 90% at rated output(power saving than thyristor rectifier)


Approximately 25% (depends on the system impedance)

If need lower THDi, please tell us to provide optimized solution

High frequency transformer


Paint Color


IGBT Rectifier Advantages and Benefit:

1. Cost effective;

2. Power saving and bill saving because of higher efficiency than SCR rectifier;

3. Modular structure, small size, about 1/6 size of SCR/Diode rectifier, saving space; 

4. Anti corrosion treatment, longer lifespan:

With corrosion proof coating (powder coated cabinet) to protect from corrosive environment.

All the PCB assemblies is humi- sealed/lacquer coated.

Partially sealed designs protect critical electronics from harsh environment.

Stainless steel bolts, nuts, screws etc are used.

5. Wide range input voltage: +/-20% input voltage, support wide fluctuation range;

6. Reliable quality, 100% output, 365 days, robust, production line 7*24 hours reliable non-stop running;

7. Touch panel(STA series): protection with automatic alarm and fault indication, history data record, with output waveform, easy operation, maintenance and monitoring;

8. Amperehour counting function(STA series), no need extra ampere hour meter, saving cost.

9. Timer function(STA series), easy reading and control running time, no need extra timer;

10. Suitable for hot environment, continuous running under high temperature;

11. Digital control to ensure control reliable more than 15 years, long time reliable;

12. RS485, 4-20mA, 0-10V PLC remote control interface for free, easy for PLC control;

13. Short circuit,DC output overcurrent, over heat, IGBT driving fault protections etc., better protect human and equipments.

14. Easy maintenance, shorten maintenance time and reduce labor work;

15. Short lead time 2-3 weeks for standard power;

16. Lifespan technical support, no worry of after sale service;

17. Indian local agent available for local service;

18. Reply you within 24h, Online 16h/day, get reply efficiently.

Touch panel main page diaplay:


(1) Communication Status:

Flush green imply communication is OK, always red imply communication is failure

(2) Output DC output and voltage.

(3) AmpereHour counting display

(4) Timer counting display

(5) Running mode display

Control Mode: Local control (control by touch panel) or Remote control (control by RS485 communication)

Output Mode: Constant Voltage or Constant Current

(6) Running status display

Running: always red-Stopped status, green flash-running

Alarm: gray-no protection, red flash-there is protection

(7) Light Load/Short Load

When the load is light load(without plating parts), the rectifier will detect it and protect the rectifier with limited voltage.

Looking for 2000a15v anodising power supply? Green Power Technology is one of the professional manufacturers and suppliers. We have been dedicated to this field for over 20 years and already exported products to India, USA, Germany, etc. Equipped with a productive factory, we warmly welcome you to buy our high quality products made in China at competitive price or try our customized service.
Hot Tags: 2000a15v anodising power supply China, India, manufacturers, factory, customized, high quality, price

Send Inquiry

You Might Also Like